User Manual

spark - InfiniScale® III Firmware Burning ToolRev 1.50
Mellanox Technologies
52
Appendix E: MTUSB-1 USB to I2C Adapter
E.1 Overview
The MTUSB-1 is a USB to I
2
C bus adapter. This chapter provides the user with hardware and soft-
ware installation instructions on machines running Linux or Windows operating systems.
E.1.1 Package Contents
Please make sure that your package contains the items listed in Table 7 and that they are in good
condition.
E.1.2 System Requirements
The MTUSB-1 is a USB device which may be connected to any Personal Computer with a USB
Host Adapter (USB Standard 1.1 or later) and having at least one USB connection port.
E.1.3 Supported Platforms
MTUSB-1 supports the same platforms that are supported by the MFT tools package.
Table 7 - MTUSB-1 Package Contents
Item Quantity Description
MTUSB-1 device 1
USB to I
2
C bus adapter
USB cable 1 USB_A to USB_B (1.8m)
I2C cable 1 9-pin male-to-male cable (1.5m)
Converter cable 2 9-pin female to 3-pin (small/large) (0.3m)
Figure 3: MTUSB-1 Device
I2C Cable
USB
Cable
MTUSB-1 Device