User Manual

Rev 1.50

Mellanox Technologies

Example:

spark -d /dev/mst/mtusb-1 rb 0x56 0x0 0x1000 out.img

swreset - SW-resets the target switch device. In response to this command, the tar-

get switch device:

continues to transport packets to their destinations

ignores management packets that are destined to the target switch device

itself

resets itself after about 15 seconds from receiving the command. The 15-

second delay is intended to allow for spark to reset other switches in the

fabric.

Example:

spark -d 0x13 swreset // this command SW-resets the switch device with

LID 0x13