User Manual

flint – Firmware Burning ToolsRev 1.50
Mellanox Technologies
34
3. (Optional) Query the image to verify the GUIDs are set. The “-striped_image” flag must be
specified when querying a striped image.
Now the fw-ConnectX2-rel.bin image can be pre-burned to the flash. After the assembly the
device would be fully functional.
3.2.3.3 Setting the VSD
To set the vsd for the given image/device(4th generation), use the 'sv' command with -vsd flag.
Example:
> flint -i ./fw-ConnectX2-rel.bin -striped_image q
Image type: ConnectX
FW Version: 2.8.0
Device ID: 26428
Chip Revision: B0
Description: Node Port1 Port2 Sys image
GUIDs: 0002c9030abcdef0 0002c9030abcdef1 0002c9030abcdef2 0002c9030abcdef3
MACs: 0002c9bcdef1 0002c9bcdef2
Board ID: n/a (MT_0D80110009)
VSD: n/a
PSID: MT_0D80110009
> flint -d /dev/mst/mt25418_pci_cr0 -vsd "VSD" sv
Setting the VSD - OK
Restoring signature - OK
> flint -d /dev/mst/mt25418_pci_cr0 q
Image type: ConnectX
FW Version: 2.7.9450
Rom Info: type=PXE version=3.0.0 devid=25418 proto=VPI
Device ID: 25418
Chip Revision: A0
Description: Node Port1 Port2 Sys image
GUIDs: 0002c9000120d050 0002c9000120d051 0002c9000120d052 0002c9000120d053
MACs: 02c90120d050 02c90120d051
Board ID: VSD (MT_04C0110002)