User Manual

Rev 1.50
Mellanox Technologies
19
y To update firmware on an MT43132 InfiniScale device in a switch system such as
Flextronics’ F-X430066 Stallion 8 4X IB port switch, enter:
y To generate an MT47396 image and perform an In-Band update of the device with LID
0x11, enter:
2.5 Exit Return Values
The following exit values are returned:
y 0 - successful completion
y >0 - an error occurred
mlxburn -image Stallion_5_5_0.eeprom -dev /dev/mst/mtusb-1 -dev_type 43132
This firmware update cannot be performed before initializing the MST device (mtusb-
1) to connect to the I2C-compatible bus of the InfiniScale and its EEPROM.
mlxburn -dev lid-0x11 -fw ./IS3FW.BIN