User Manual

Rev 1.50
Mellanox Technologies
17
y Generate an MT48436 image and perform an In-Band update of the device with LID
0x18:
y Generate and burn a new MSX6025 via I2C:
 Set the I2C network to access the InfiniScaleIV switch.
y Burn the new image (the flash is still blank ) specifying the Node GUID, system
GUID, base MAC and Switch MAC. Note that 4 guids (in quotes) should be specified
as an argument to the -guids flag. The 2 middle GUIDs are ignored by SwitchX and
should be set to 0.
2.4.3 InfiniScale IV Switch Examples
y Burn an MTS3600 switch system via I2C:
a. Set the I2C network to access the InfiniScale IV switch.
b. Burn with quick query (-qq) to shorten burn time
y Burn an MTS3600 switch system using the In-Band access method:
y Generate and burn a new MTS3600 via I2C:
a. Set the I2C network to access the InfiniScaleIV switch.
b. Burn the new image (the flash is still blank ) specifying the Node and System GUIDs. Note that 4 guids (in
quotes) should be specified as an argument to the -guids flag. The 2 middle GUIDs are ignored by the
InfiniScaleIV and should be set to 0.
mlxburn -dev lid-0x000E -fw ./fw-sx.mlx
mlxi2c -d /dev/mst/mtusb-1 p /SX
mlxburn -d /dev/mst/mtusb-1 -fw ./fw-sx.mlx -conf MSX6025F_A1.ini -guids "000002c900002100 0 0
000002c900002100" -macs "0002c9002100 0002c9002101" -nofs
mlxi2c -d /dev/mst/mtusb-1 p /IS4_PRIM
mlxburn -dev /dev/mst/mtusb-1 -fw ./fw-IS4.mlx -qq
mlxburn -dev /dev/mst/SW_MT48438_lid-0x0003 -fw ./fw-IS4.mlx
mlxi2c -d /dev/mst/mtusb-1 p /IS4_PRIM
mlxburn -dev /dev/mst/mtusb-1 -fw ./fw-IS4.mlx -conf ./MTS3600Q-1UNC_A1.ini-guids
"0002c9000100d060 0 0 0002c9000100d060" -nofs