User Manual
mlxburn - FW Image Generator & BurnerRev 1.50
Mellanox Technologies
16
48437 - For MT48436 InfiniScale IV based switch systems (IB @ DDR)
48438 - For MT48436 InfiniScale IV based switch systems (IB @ QDR)
64102, 64122 - For MT64102 BridgeX based gateway systems
1016 - For MT1016 PhyX devices
51000 - For MT58100 SwitchX based switch systems
4099 - For MT27500 ConnectX-3
2.3.1 Additional mlxburn Options
The following is a list of additional options. Please see Chapter 3, “flint – Firmware Burner” for
the HCA options, and Chapter 4, “spark - Switch Firmware Burning” for the switch options.
For adapters, bridges and 4th generation switches:
1
For InfiniScale III switches:
2
2.4 Examples of mlxburn Usage
2.4.1 Host Channel Adapter Examples
y
To update firmware on an MT25408 ConnectX
®
adapter device with the configuration
file (.ini) auto-detected, enter:
y
To generate a failsafe image file for the same adapter above without burning, enter:
y
To update firmware on the same adapter above with the configuration file (.ini) explic-
itly specified, enter:
2.4.2 SwitchX™ Switch Examples
y
Burn an MSX6025 switch system using the In-Band access method:
[-byte_mode] [-use_image_ps] [-skip_is] [-mac(s)] [-guid(s)] [-sysguid] [-vsd] [-qq] [-uid(s)] [-
log] [-blank_guids] [-flash_params] [-allow_psid_change] [-no_flash_verify] [-use_image_rom
-override_cache_replacement] [-use_image_guids] [-bank]
1. The arguments of the -guids and -macs flags must be provided within quotation marks; for example,
mlxburn -macs “0002c900001 0002c900002”
[-guid] [-sysguid] [-ndesc] [-bsn] [-pe_i2c] [-se_i2c] [-is3_i2c]
2. The -guid flag is supported by all Mellanox Technologies’ adapters and switch devices.
mlxburn -fw ./fw-25408-rel.mlx -dev /dev/mst/mt25418_pci_cr0
mlxburn -fw ./fw-25408-rel.mlx -conf ./MHEH28-XTC_A1.ini -wrimage ./fw-25418.bin
mlxburn -fw ./fw-25408-rel.mlx -dev /dev/mst/mt25418_pci_cr0
-conf ./MHEH28-XTC_A1.ini
mlxburn -dev /dev/mst/SW_MT51000_000002c900002100_lid-0x000E -fw ./fw-sx.mlx