User Manual

IntroductionRev 1.50

Mellanox Technologies

See

Appendix D,“In-Band Access to Multiple IB Subnets,” on page 52

for details on how to access

devices in multiple IB subnets.

Via PCI user level: <bus:dev.fn>

For example, if you run lspci -d 15b3: Mellanox devices and PCI Device IDs will be displayed.

1.4 MFT Installation

1.4.1 Install MFT On Linux OS

From MFT version 2.6.2, MFT installation method on Linux OS is RPM based. MFT applications

are installed using a pre-compiled binary RPM, and Kernel modules are distributed as a source

RPM and compiled by the installation script.

To install MFT, perform the following:

1. Download the Linux MFT package from the Mellanox Management Tools webpage:http://

www.mellanox.com/products/management_tools.php

2. Untar the downloaded package

3. Run 'install.sh'

4. Start the mst driver by running: mst start

1.4.2 Uninstall MFT (Linux)

To uninstall MFT (Linux) run:

1.4.3 Install MFT On Windows OS

1. Download the Windows MFT MSI from http://www.mellanox.com/products/

management_tools.php.

2. Double-click the MSI and follow the instructions for installation.

The mst device name obtained in this method can only be used with the mlxburn tool

with the ‘-ul’ flag.

> /sbin/lspci -d 15b3:

02:00.0 Ethernet controller: Mellanox Technologies Unknown device 6368 (rev a0)

It is possible to customize some installation parameters (such as the target installation

path). Run 'install.sh --help' for details.

> rpm -e mft kernel-mft