User Manual

Rev 2.3-1.0.1
Mellanox Technologies
93
Parameter Description Example
guid list Comma separated list of guids to include
in the group.
If no specific physical ports were config-
ured, all physical ports of the guid are
chosen. However, for each guid, one can
detail specific physical ports to be
included in the group. This can be done
using the following syntax:
• Specify a specific port in a guid to be chosen
port-guid: 0x283@3
• Specify a specific list of ports in a guid to be
chosen
port-guid: 0x286@1/5/7
• Specify a specific range of ports in a guid to be
chosen
port-guid: 0x289@2-5
• Specify a list of specific ports and ports ranges
in a guid to be chosen
port-guid: 0x289@2-5/7/9-13/18
• Complex rule
port-guid: 0x283@5-8/12/14, 0x286, 0x289/6/
8/12
port-guid: 0x283,
0x286, 0x289
port guid range It is possible to configure a range of guids
to be chosen to the group. However, while
using the range qualifier, it is impossible
to detail specific physical ports.
Note: A list of ranges cannot be speci-
fied. The below example is invalid and
will cause the policy to fail:
port-guid-range: 0x283-0x289, 0x290-
0x295
port-guid-range:
0x283-0x289