User Manual

Features Overview and ConfigurationRev 2.3-1.0.1

Mellanox Technologies

 To get QCN current configuration sorted by priority:

mlnx_qcn -i eth2 -g parameters

 To show QCN's statistics sorted by priority:

mlnx_qcn -i eth2 -g statistics

Example output when running mlnx_qcn -i eth2 -g parameters:

-i INTF, --interface=INTF Interface name

-g TYPE, --get_type=TYPE Type of information to get statistics/param-

eters

--rpg_enable=RPG_ENABLE_LIST Set value of rpg_enable according to prior-

ity, use spaces between values and -1 for

unknown values.

--rppp_max_rps=RPPP_MAX_RPS_LIST Set value of rppp_max_rps according to prior-

ity, use spaces between values and -1 for

unknown values.

--rpg_time_reset=RPG_TIME_RESET_LIST Set value of rpg_time_reset according to pri-

ority, use spaces between values and -1 for

unknown values.

--rpg_byte_reset=RPG_BYTE_RESET_LIST Set value of rpg_byte_reset according to pri-

ority, use spaces between values and -1 for

unknown values.

--rpg_threshold=RPG_THRESHOLD_LIST Set value of rpg_threshold according to pri-

ority, use spaces between values and -1 for

unknown values.

--rpg_max_rate=RPG_MAX_RATE_LIST Set value of rpg_max_rate according to prior-

ity, use spaces between values and -1 for

unknown values.

--rpg_ai_rate=RPG_AI_RATE_LIST Set value of rpg_ai_rate according to prior-

ity, use spaces between values and -1 for

unknown values.

--rpg_hai_rate=RPG_HAI_RATE_LIST Set value of rpg_hai_rate according to prior-

ity, use spaces between values and -1 for

unknown values.

--rpg_gd=RPG_GD_LIST Set value of rpg_gd according to priority,

use spaces between values and -1 for unknown

values.

--rpg_min_dec_fac=RPG_MIN_DEC_FAC_LIST Set value of rpg_min_dec_fac according to

priority, use spaces between values and -1

for unknown values.

--rpg_min_rate=RPG_MIN_RATE_LIST Set value of rpg_min_rate according to prior-

ity, use spaces between values and -1 for

unknown values.

--cndd_state_machine=CNDD_STATE_MACHINE_LIST Set value of cndd_state_machine according to

priority, use spaces between values and -1

for unknown values.