User Manual

ManualsBrandsAsus ManualsServer AccessoriesPEM-FDR

In case your machine has the latest firmware, no firmware update will occur and the

installation script will print at the end of installation a message similar to the follow-

ing:

Device #1:

----------

Device Type: ConnectX3Pro

Part Number: MCX354A-FCC_Ax

Description: ConnectX-3 Pro VPI adapter card; dual-port

QSFP; FDR IB (56Gb/s) and 40GigE;PCIe3.0 x8 8GT/s;RoHS R6

PSID: MT_1090111019

PCI Device Name: 0000:05:00.0

Versions: Current Available

FW 2.31.5000 2.31.5000

PXE 3.4.0224 3.4.0224

Status: Up to date

In case your machine has an unsupported network adapter device, no firmware update

will occur and the error message below will be printed. Please contact your hardware

vendor for help on firmware updates.

Error message:

Device #1:

----------

Device: 0000:05:00.0

Part Number:

Description:

PSID: MT_0DB0110010

Versions: Current Available

FW 2.9.1000 N/A

Status: No matching image found

Rev 2.3-1.0.1

Mellanox Technologies

Step 4. Reboot the machine if the installation script performed firmware updates to your network

adapter hardware. Otherwise, restart the driver by running:

"/etc/init.d/openibd

restart"

Step 5. (InfiniBand only) Run the hca_self_test.ofed utility to verify whether or not the

InfiniBand link is up. The utility also checks for and displays additional information such as

• HCA firmware version

• Kernel architecture

• Driver version

• Number of active HCA ports along with their states

• Node GUID

For more details on hca_self_test.ofed, see the file hca_self_test.readme

under docs/.

After the installer completes, information about the Mellanox OFED installation such as prefix,

kernel version, and installation parameters can be retrieved by running the command

/etc/

infiniband/info

Most of the Mellanox OFED components can be configured or reconfigured after the installation

by modifying the relevant configuration files. See the relevant chapters in this manual for details.

The list of the modules that will be loaded automatically upon boot can be found in the

/etc/

infiniband/openib.conf

file.