User Manual

Rev 2.0-3.0.0
Mellanox Technologies
35
Note: For more details on hca_self_test.ofed, see the file hca_self_test.readme
under
docs/.
2.3.4 Installation Results
Software
Most of MLNX_OFED packages are installed under the “/usr” directory except for the
following packages which are installed under the “/opt” directory:
openshmem, bupc, fca and ibutils
The kernel modules are installed under
/lib/modules/`uname -r`/updates on SLES and Fedora Distributions
/lib/modules/`uname -r`/extra/mlnx-ofa_kernel on RHEL and other RedHat like Distribu-
tions
/lib/modules/`uname -r`/updates/dkms/ on Ubuntu
# hca_self_test.ofed
---- Performing Adapter Device Self Test ----
Number of CAs Detected ................. 2
PCI Device Check ....................... PASS
Kernel Arch ............................ x86_64
Host Driver Version .................... MLNX_OFED_LINUX-2.0-2.0.0 (OFED-2.0-2.0.0):
2.6.32-279.el6.x86_64
Host Driver RPM Check .................. PASS
Firmware on CA #0 NIC .................. v2.9.1000
Firmware Check on CA #0 (NIC) .......... PASS
Firmware on CA #1 NIC .................. v2.11.500
Firmware Check on CA #1 (NIC) .......... PASS
Host Driver Initialization ............. PASS
Number of CA Ports Active .............. 4
Port State of Port #1 on CA #0 (NIC)..... UP 1X QDR (Ethernet)
Port State of Port #2 on CA #0 (NIC)..... UP 1X QDR (Ethernet)
Port State of Port #1 on CA #1 (NIC)..... UP 1X QDR (Ethernet)
Port State of Port #2 on CA #1 (NIC)..... UP 1X QDR (Ethernet)
Error Counter Check on CA #0 (NIC)...... NA (Eth ports)
Error Counter Check on CA #1 (NIC)...... NA (Eth ports)
Kernel Syslog Check .................... PASS
Node GUID on CA #0 (NIC) ............... 00:02:c9:03:00:07:4f:f8
Node GUID on CA #1 (NIC) ............... 00:02:c9:03:00:35:fd:c0
------------------ DONE ---------------------
After the installer completes, information about the Mellanox OFED installation such as
prefix, kernel version, and installation parameters can be retrieved by running the com-
mand
/etc/infiniband/info.