User Manual

Driver FeaturesRev 1.8.2
Mellanox Technologies
16
4.2.2 IPoIB Configuration
1. Install the Mellanox OFED driver for VMware
2. Verify the driver VIBs are installed correctly. Run:
(a.k.a “esxcfg-nics -l”)
3. Verify the uplinks state is "up". Run:
(a.k.a “esxcfg-nics -l”)
See your VMware distribution documentation for additional information about configuring IP
addresses.
# esxcli software vib list | grep -i Mellanox
# esxcli network nic list | grep -i Mellanox