User Manual

Rev 4.60
Mellanox Technologies
84
Examples
• Unicast examples
• Multicast example
8.3.11 sminfo
Optionally sets and displays the output of a sminfo query in a readable format. The target SM is
the one listed in the local port info, or the SM specified by the optional SM lid or by the SM
direct routed path.
--Lid, -L Uses LID address argument
--errors, -e Shows send and receive errors
--usage, -u Usage message
--Guid, -G Uses GUID address argument. In most cases, it is the Port GUID.
Example:
"0x08f1040023"
--sm_port, -s <smlid> Uses 'smlid' as the target lid for SM/SA queries
--help, -h Shows the usage message
-verbose, -v/-vv/-v -v -v Increases the application verbosity level
--version, -V Shows the version info
--Ca, -C <ca_name> Uses the specified ca_name
--Port, -P <ca_port> Uses the specified ca_port
--timeout, -t <timeout_ms> Overrides the default timeout for the solicited mads
ibtracert 4 16 # show path between lids 4 and 16
ibtracert -n 4 16 # same, but using simple output format
ibtracert -G 0x8f1040396522d 0x002c9000100d051 # use guid addresses
ibtracert -m 0xc000 4 16 # show multicast path of mlid 0xc000 between lids 4 and
16
Using sminfo for any purposes other than simple query may result in a mal-
function of the target SM.
Table 19 - ibtracert Flags and Options
Flag Description