User Manual

Rev 4.60
Mellanox Technologies
8
Document Revision History
Table 1 - Document Revision History
Document Revision Date Changes
Rev 4.60 December 30, 2013 Updated the following sections:
• Section 3.7.2.2, “Configuring Windows Host”, on
page 30
- Updated the example in Step 5
•
Section 6.1.4.1, “Performance Tuning Tool Appli-
cation”, on page 47
- Updated the Options table
• Section 6.2, “Application Specific Optimization
and Tuning”, on page 50
- Removed the “Bus-master
DMA Operations”
•
Section 7, “OpenSM - Subnet Manager”, on
page 60
- Added an option of how to register OpemSM via
the PowerShell
•
Section 3.8.2, “Configuring the NVGRE using
PowerShell”, on page 29
Added the following sections:
• Section 5.3, “Configuring Quality of Service
(QoS)”, on page 43
• Appendix B: “NVGRE Configuration Scrips
Examples,” on page 132
Rev 4.55 December 15, 2013 Updated the following sections:
• Section 3.8, “Network Virtualization using
Generic Routing Encapsulation”, on page 28
• Section 3.8.2, “Configuring the NVGRE using
PowerShell”, on page 29
November 07, 2013
Updated the following sections:
•
Section 3.7.2.2, “Configuring Windows Host”, on
page 23
• Section 8.4.19.1, “NTttcp Synopsys”, on page 114
October 03, 2013 Added support for Windows Server 2012 R2
Rev 4.40 July 17, 2013 Updated the following sections:
•
Section 3.7.1, “RoCE Overview”, on page 29
• Section 7, “OpenSM - Subnet Manager”, on
page 60
• Section 8.4.19, “NTttcp”, on page 121
• Section 10, “Troubleshooting”, on page 124
Added Appendix A: “Windows MPI (MS-MPI),” on
page 129