User Manual

Rev 4.60
Mellanox Technologies
68
8.3.4 ibroute
Uses SMPs to display the forwarding tables for unicast (LinearForwardingTable or LFT) or mul-
ticast (MulticastForwardingTable or MFT) for the specified switch LID and the optional lid
(mlid) range. The default range is all valid entries in the range of 1 to FDBTop.
8.3.4.1 ibroute Applicable Hardware
InfiniBand switches.
8.3.4.2 ibroute Synopsis
8.3.4.3 ibroute Options
The table below lists the various ibroute flags of the command.
LinkSpeedEnabled:................2.5 Gbps
After PortInfo set:
# Port info: DR path slid 65535; dlid 65535; 0 port 1
LinkSpeedEnabled:................5.0 Gbps (IBA extension)
# Show the new configuration
> ibportstate -C mlx4_0 -D 0 1
PortInfo:
# Port info: DR path slid 65535; dlid 65535; 0 port 1
LinkState:.......................Initialize
PhysLinkState:...................LinkUp
LinkWidthSupported:..............1X or 4X
LinkWidthEnabled:................1X or 4X
LinkWidthActive:.................4X
LinkSpeedSupported:..............2.5 Gbps or 5.0 Gbps
LinkSpeedEnabled:................5.0 Gbps (IBA extension)
LinkSpeedActive:.................5.0 Gbps
ibroute [-h] [-d] [-v] [-V] [-a] [-n] [-D] [-G] [-M] [-L] [-e] [-u] [-s <smlid>] \
[-C <ca_name>] [-P <ca_port>] [-t <timeout_ms>] \ [<dest dr_path|lid|guid>
[<startlid> [<endlid>]]]
Table 13 - ibroute Flags and Options
Flag Description
-h/--help Print the help menu
-d/--debug Raise the IB debug level. May be used several times for higher debug
levels (-ddd or -d -d -d)
-a/--all Show all LIDs in range, including invalid entries
-v/--verbose Increase verbosity level. May be used several times for additional verbos-
ity (-vvv or -v -v -v)
-V/--version Show version info