User Manual
Table Of Contents
- Mellanox WinOF VPI User Manual
- Table of Contents
- List of Tables
- Document Revision History
- About this Manual
- 1 Introduction
- 2 Firmware Upgrade
- 3 Driver Features
- 3.1 Hyper-V with VMQ
- 3.2 Header Data Split
- 3.3 Receive Side Scaling (RSS)
- 3.4 Port Configuration
- 3.5 Load Balancing, Fail-Over (LBFO) and VLAN
- 3.6 Ports TX Arbitration
- 3.7 RDMA over Converged Ethernet (RoCE)
- 3.8 Network Virtualization using Generic Routing Encapsulation
- 3.9 Differentiated Services Code Point (DSCP)
- 4 Deploying Windows Server 2012 and Above with SMB Direct
- 5 Driver Configuration
- 6 Performance Tuning
- 7 OpenSM - Subnet Manager
- 8 InfiniBand Fabric
- 8.1 Network Direct Interface
- 8.2 part_man - Virtual IPoIB Port Creation Utility
- 8.3 InfiniBand Fabric Diagnostic Utilities
- 8.3.1 Utilities Usage
- 8.3.2 ibdiagnet
- 8.3.3 ibportstate
- 8.3.4 ibroute
- 8.3.5 ibdump
- 8.3.6 smpquery
- 8.3.7 perfquery
- 8.3.8 ibping
- 8.3.9 ibnetdiscover
- 8.3.10 ibtracert
- 8.3.11 sminfo
- 8.3.12 ibclearerrors
- 8.3.13 ibstat
- 8.3.14 vstat
- 8.3.15 osmtest
- 8.3.16 ibaddr
- 8.3.17 ibcacheedit
- 8.3.18 iblinkinfo
- 8.3.19 ibqueryerrors
- 8.3.20 ibsysstat
- 8.3.21 saquery
- 8.3.22 smpdump
- 8.4 InfiniBand Fabric Performance Utilities
- 8.4.1 ib_read_bw
- 8.4.2 ib_read_lat
- 8.4.3 ib_send_bw
- 8.4.4 ib_send_lat
- 8.4.5 ib_write_bw
- 8.4.6 ib_write_lat
- 8.4.7 ibv_read_bw
- 8.4.8 ibv_read_lat
- 8.4.9 ibv_send_bw
- 8.4.10 ibv_send_lat
- 8.4.11 ibv_write_bw
- 8.4.12 ibv_write_lat
- 8.4.13 nd_write_bw
- 8.4.14 nd_write_lat
- 8.4.15 nd_read_bw
- 8.4.16 nd_read_lat
- 8.4.17 nd_send_bw
- 8.4.18 nd_send_lat
- 8.4.19 NTttcp
- 9 Software Development Kit
- 10 Troubleshooting
- 11 Documentation
- Appendix A: Windows MPI (MS-MPI)
- Appendix B: NVGRE Configuration Scrips Examples
Rev 4.60
Mellanox Technologies
59
Bytes Sent The number of bytes sent that are covered by this priority. The counted
bytes include framing characters (modulo 2^64).
Bytes Sent/Sec The number of bytes sent per second that are covered by this priority. The
counted bytes include framing characters.
Packets Sent The number of packets sent that are covered by this priority (modulo
2^64).
Packets Sent/Sec The number of packets sent per second that are covered by this priority.
Bytes and Packets’ TOTAL
Bytes Total The total number of bytes that are covered by this priority. The counted
bytes include framing characters (modulo 2^64).
Bytes Total/Sec The total number of bytes per second that are covered by this priority. The
counted bytes include framing characters.
Packets Total The total number of packets that are covered by this priority (modulo
2^64).
Packets Total/Sec The total number of packets per second that are covered by this priority.
PAUSE INDICATION
Per prio sent pause frames The number of pause frames that were sent to priority i. The untagged
instance indicates global pause that were sent.
Per prio sent pause duration The total duration in microseconds of pause that was sent to the other end
to freeze the transmission on priority i.
Per prio rcv pause frames The number of pause frames that were received for priority i. The
untagged instance indicates global pause that were received
Per prio rcv pause duration The total duration in microseconds of pause that was requested by the
other end to freeze transmission on priority i.
Table 9 - Mellanox QoS Counters
Mellanox QoS Counters Description