User Manual

Rev 2.2-1.0.1
Mellanox Technologies
37
--force-fw-update Force firmware update
--force Force installation
--all|--hpc|--basic|--msm Install all, hpc, basic or Mellanox Subnet manager
packages correspondingly
--vma|--vma-vpi Install packages required by VMA to support VPI
--vma-eth Install packages required by VMA to work over
Ethernet
--with-vma Set configuration for VMA use (to be used with any
installation parameter).
--guest Install packages required by guest os
--hypervisor Install packages required by hypervisor os
-v|-vv|-vvv Set verbosity level
--umad-dev-rw Grant non root users read/write permission for
umad devices instead of default
--umad-dev-na Prevent from non root users read/write access for
umad devices. Overrides '--umad-dev-rw'
--enable-affinity Run mlnx_affinity script upon boot
--disable-affinity Disable mlnx_affinity script (Default)
--enable-sriov Burn SR-IOV enabled firmware - Note: Enable/Dis-
able of SRIOV in a non-volatile configuration
through uEFI and/or tool will override this flag.
--add-kernel-support Add kernel support (Run
mlnx_add_kernel_support.sh)
--skip-distro-check Do not check MLNX_OFED vs Distro matching
--hugepages-overcommit Setting 80% of MAX_MEMORY as overcommit for huge
page allocation
-q Set quiet - no messages will be printed
--without-<package> Do not install package
--with-fabric-collector Install fabric-collector package.