User Manual

Rev 2.2-1.0.1
Mellanox Technologies
315
Step 19. Click Next. Allow the installation to reach completion.
E.5.1 SAN-Booting the Diskless Client with FlexBoot
When the installation process is completed, the client will ask to reboot. At that point, the DHCP
server configuration for that client needs to be changed so that when it PXE boots again, it will
get the root-path IQN and LUN information from the DHCP server.
For further information, please refer to section DHCP Configuration for iSCSI Boot with Flex-
Boot (PXE SAN Boot).
Restart your DHCP service after changing the dhcp configuration file.
• Reboot the system
The expected result is that for the diskless PXE client to boot the newly installed RHEL6.4 from
the iSCSI storage, and become an operational environment, accessible from any remote PC via
ssh over 10GbE IP network
E.6 Sanity Checks
E.6.1 iSCSI Login
From a remote PC (called sqa070 below) with 10GE network connection to the iSCSI target,
configure an iSCSI Initiator service and verify the correct target configuration by logging into the
target. For CHAP configuration, refer to
Step 1. Install the initiator.
[root@sqa070 ~ ]# yum install -y iscsi-initiator-utils