User Manual

Rev 2.2-1.0.1
Mellanox Technologies
312
Step 6. In the Advanced Storage Options window perform the following:
Step a. Select the Add Iscsi Target option.
Step b. Check the Bind targets to network interfaces checkbox.
Step c. Click +Add drive button.
Step 7. Enter the IP address of iSCSI target.
Optionally, you may choose to enter a customized Initiator Name and select the necessary
CHAP authentication of choice. Please refer to Section E.5.1, “SAN-Booting the Diskless
Client with FlexBoot”, on page 315 for further information.
In the example below, iSCSI Initiator Name is left with the default value given by the
installer and iSCSI discovery authentication is left with No authentication.
Step 8. Check the relevant Node Name to log in.
If as a result of the discovery, multiple Node Names are found, select the one that is rele-
vant to you.