User Manual

InfiniBand Fabric UtilitiesRev 2.2-1.0.1
Mellanox Technologies
288
Additional Options
The table below lists the additional flags of the command
Table 62 - Additional raw_ethernet_bw Flags and Options
Flag Description
--inline_recv=<size> Max size of message to be sent in inline receive
--output=<units> Set verbosity output level: bandwidth , message_rate,
latency_typical
--pkey_index=<pkey index> PKey index to use for QP
--report-both Report RX & TX results separately on Bidirectinal BW
tests
--report_gbits Report Max/Average BW of test in Gbit/sec (instead of
MB/sec)
--run_infinitely Run test forever, print results every <duration> seconds
.
-V, --version Display version number
-w, --limit_bw Set verifier limit for bandwidth
-x, --gid-index=<index> Test uses GID with GID index (Default : IB - no gid .
ETH - 0)
-y, --limit_msgrate Set verifier limit for Msg Rate
-z, --com_rdma_cm Communicate with rdma_cm module to exchange data -
use regular QPs
Table 61 - raw_ethernet_bw Flags and Options
Flag Description