User Manual

Rev 2.2-1.0.1
Mellanox Technologies
261
Options
--cckey, -c <key> CC key
--config, -z <config> use config file, default: /etc/infiniband-diags/ibdiag.conf
--Ca, -C <ca> Ca name to use
--Port, -P <port> Ca port number to use
--Lid, -L use LID address argument
--Guid, -G use GUID address argument
--timeout, -t <ms> timeout in ms
--sm_port, -s <lid> SM port lid
--m_key, -y <key> M_Key to use in request
--errors, -e show send and receive errors
--verbose, -v increase verbosity level
--debug, -d raise debug level
--help, -h help message
--version, -V show version
Examples
ibccconfig SwitchCongestionSetting 2 0x1F
0x1FFFFFFFFF 0x0 0xF 8 0 0:0 1
# Configure Switch Congestion Settings
ibccconfig CACongestionSetting 1 0 0x3 150 1 0 0 # Configure CA Congestion Settings to SL 0 and
SL 1
ibccconfig CACongestionSetting 1 0 0x4 200 1 0 0 # Configure CA Congestion Settings to SL 2
ibccconfig CongestionControlTable 1 63 0 0:0 0:1
...
# Configure first block of Congestion Control
Table
ibccconfig CongestionControlTable 1 127 0 0:64
0:65 ...
# Configure second block of Congestion Control
Table
9.4.25 ibccquery
Supports the querying of settings and other information related to congestion control.
Synopsis
ibccquery [options] [-c key] <op> <lid|guid>
Operations
CongestionControlTable (CT) <lid|guid> <cctilimit> <index> <cctentry> <cctentry>
Operation Parameters
ClassPortInfo (CP) <lid|guid>
CongestionInfo (CI) <lid|guid>
CongestionKeyInfo (CK <lid|guid>
Operation Parameters