User Manual

RcvSwRelayErrors:................70
XmtDiscards:.....................488
XmtConstraintErrors:.............0
RcvConstraintErrors:.............0
LinkIntegrityErrors:.............0
ExcBufOverrunErrors:.............0
VL15Dropped:.....................0
XmtData:.........................129840354
RcvData:.........................129529906
XmtPkts:.........................1803332
RcvPkts:.........................1799018
InfiniBand Fabric UtilitiesRev 2.2-1.0.1
Mellanox Technologies
252
3. Read then reset performance counters from LID 2, port 1.
> perfquery -r 2 1
# Port counters: Lid 2 port 1
PortSelect:......................1
CounterSelect:...................0x0100
SymbolErrors:....................0
LinkRecovers:....................0
LinkDowned:......................0
RcvErrors:.......................0
RcvRemotePhysErrors:.............0
RcvSwRelayErrors:................0
XmtDiscards:.....................3
XmtConstraintErrors:.............0
RcvConstraintErrors:.............0
LinkIntegrityErrors:.............0
ExcBufOverrunErrors:.............0
VL15Dropped:.....................0
XmtData:.........................0
RcvData:.........................0
XmtPkts:.........................0
RcvPkts:.........................0
9.4.18 mstflint
Queries and burns a binary firmware-image file on non-volatile (Flash) memories of Mellanox
InfiniBand and Ethernet network adapters. The tool requires root privileges for Flash access.
If you purchased a standard Mellanox Technologies network adapter card, please down-
load the firmware image from www.mellanox.com > Downloads > Firmware. If you
purchased a non-standard card from a vendor other than Mellanox Technologies, please
contact your vendor.
To run mstflint, you must know the device location on the PCI bus. See Example 1 for details.
Synopsis
mstflint [switches...] <command> [parameters...]