User Manual

InfiniBand Fabric UtilitiesRev 2.2-1.0.1
Mellanox Technologies
250
--flowctlcounters Show flow control counters
--vloppackets Show packets received per Op code per VL
--vlopdata Show data received per Op code per VL
--vlxmitflowctlerrors Show flow control update errors per VL
--vlxmitcounters Show ticks waiting to transmit counters per VL
--swportvlcong Show sw port VL congestion
--rcvcc Show Rcv congestion control counters
--slrcvfecn Show SL Rcv FECN counters
--slrcvbecn Show SL Rcv BECN counters
--xmitcc Show Xmit congestion control counters
--vlxmittimecc Show VL Xmit Time congestion control counters
--smplctl, -c Show samples control
--all_ports, -a Show aggregated counters
--loop_ports, -l Iterate through each port
--reset_after_read, -r Reset counters after read
--Reset_only, -R Only reset counters
--config, -z <config> Use config file, default: /etc/infiniband-diags/ibdiag.conf
--Ca, -C <ca> Ca name to Use
--Port, -P <port> Ca port number to Use
--Lid, -L Use LID address argument
--Guid, -G use GUID address argument
--timeout, -t <ms> Timeout in ms
--sm_port, -s <lid> SM port lid
--m_key, -y <key> M_Key to use in request
--errors, -e Show send and receive errors
--verbose, -v Increase verbosity level
--debug, -d Paise debug level
--help, -h Help message
Table 41 - perfquery Options
Flag Description