User Manual
mlx4_1 (MT26448 - MT1023X00777) Hawk Dual Port fw 2.7.9400 port 2 (DOWN ) ==> eth3
(Down)
sw417:~/BXOFED-1.5.2-20101128-1524 # ibdev2netdev
mlx4_0 port 1 ==> eth5 (Down)
mlx4_0 port 1 ==> ib0 (Down)
mlx4_0 port 2 ==> ib1 (Down)
mlx4_1 port 1 ==> eth2 (Down)
mlx4_1 port 2 ==> eth3 (Down)
InfiniBand Fabric UtilitiesRev 2.2-1.0.1
Mellanox Technologies
238
9.4.13 ibstatus
Displays basic information obtained from the local InfiniBand driver. Output includes LID,
SMLID, port state, port physical state, port width and port rate.
Synopsis
ibstatus [-h] [<device name>[:<port>]]*
Output Files
Table 38 lists the various flags of the command.
Table 38 - ibstatus Flags and Options
Flag
Optional /
Mandatory
Default
(If Not
Specified)
Description
-h Optional Print the help menu
<device> Optional All devices Print information for the specified device.
May specify more than one device
<port> Optional, but
requires
specifying a
device name
All ports of
the specified
device
Print information for the specified port only
(of the specified device)
Examples
1. List the status of all available InfiniBand devices and their ports.
> ibstatus
Infiniband device 'mlx4_0' port 1 status:
default gid: fe80:0000:0000:0000:0000:0000:0007:3896
base lid: 0x3
sm lid: 0x3
state: 4: ACTIVE
phys state: 5: LinkUp
rate: 20 Gb/sec (4X DDR)
Infiniband device 'mlx4_0' port 2 status: