User Manual

InfiniBand Fabric UtilitiesRev 2.2-1.0.1
Mellanox Technologies
234
9.4.9 smpdump
smpdump is a general purpose SMP utility which gets SM attributes from a specified SMA. The
result is dumped in hex by default.
9.4.9.1 smpdump Synopsis
smpdump [-s(ring)] [-D(irect)] [-C ca_name] [-P ca_port] [-t(imeout) timeout_ms] [-V(ersion)]
[-h(elp)] <dlid|dr_path> <attr> [mod]
9.4.9.2 smpdump Options
--node-name-map
<node-name-map>
Specifies a node name map.The node name map file maps GUIDs to more user
friendly names. See ibnetdiscover(8) for node name map file format.Only used
with the -O and -U options.
• Supported query names (and aliases):
ClassPortInfo (CPI)
NodeRecord (NR) [lid]
PortInfoRecord (PIR) [[lid]/[port]/ [options]]
SL2VLTableRecord (SL2VL) [[lid]/ [in_port]/[out_port]]
PKeyTableRecord (PKTR) [[lid]/[port]/ [block]]
VLArbitrationTableRecord (VLAR) [[lid]/[port]/[block]]
InformInfoRecord (IIR)
LinkRecord (LR) [[from_lid]/ [from_port]] [[to_lid]/[to_port]]
ServiceRecord (SR)
PathRecord (PR)
MCMemberRecord (MCMR)
LFTRecord (LFTR) [[lid]/[block]]
MFTRecord (MFTR) [[mlid]/ [position]/[block]]
GUIDInfoRecord (GIR) [[lid]/[block]]
-d enables debugging.
-h Shows help.
Table 36 - smpdump Flags and Options
Flags Description
attr IBA attribute ID for SM attribute
mod IBA modifier for SM attribute
Debugging Flags Description
NOTE: Most OpenIB diagnostics take the following common flags. The exact list of supported flags per
utility can be found in the usage message and can be shown using the util_name -h syntax.
Table 35 - saquery Flags and Options
Flags Description