User Manual

Rev 2.2-1.0.1
Mellanox Technologies
233
-N Gets NodeRecord info.
--list | -D Gets NodeDescriptions of CAs only.
-S Gets ServiceRecord info.
-I Gets InformInfoRecord (subscription) info.
-L Returns the Lids of the name specified
-l Returns the unique Lid of the name specified
-G Returns the Guids of the name specified
-O Returns the name for the Lid specified
-U Returns the name for the Guid specified
-C Gets the SA’s class port info
-s Returns the PortInfoRecords with isSM or isSMdisabled capability mask bit on.
-g Gets multicast group info
-m Gets multicast member info. If a group is specified, limit the output to the group
specified and print one line containing only the GUID and node description for
each entry.
Example:
saquery -m 0xc000
-x Gets LinkRecord info.
--src-to-dst Gets a PathRecord for <src:dst> where src and dst are either node names or LIDs.
--sgid-to-dgid Gets a PathRecord for sgid to dgid where both GIDs are in an IPv6 format accept-
able to inet_pton(3).
-C <ca_name> Uses the specified ca_name.
-P <ca_port> Uses the specified ca_port.
--smkey <val> Uses SM_Key value for the query. Will be used only with "trusted" queries. If
non-numeric value (like’x’) is specified then saquery will prompt for a value.
-t, -timeout <msec> Specifies SA query response timeout in milliseconds. Default is 100 millisec-
onds. You may want to use this option if IB_TIMEOUT is indicated.
Table 35 - saquery Flags and Options
Flags Description