User Manual

InfiniBand Fabric UtilitiesRev 2.2-1.0.1
Mellanox Technologies
232
9.4.8 saquery
saquery issues the selected SA query. Node records are queried by default.
9.4.8.1 saquery Synopsis
saquery [-h] [-d] [-p] [-N] [--list | -D] [-S] [-I] [-L] [-l] [-G] [-O] [-U] [-c] [-s] [-g] [-m]
[-x] [-C ca_name] [-P ca_port][--smkey val][-t(imeout) <msec>] [--src-to-dst <src:dst>]
[--sgid-to-dgid <sgid-dgid>] [--node-name-map <node-name-map>] [<name> | <lid> | <guid>]
9.4.8.2 saquery Options
--load-cache <filename> Loads and use the cached ibnetdiscover data stored in the
specified filename. May be useful for outputting and learn-
ing about other fabrics or a previous state of a fabric. Can-
not be used if user specifies a direct route path. See
ibnetdiscover for information on caching ibnetdiscover out-
put.
--diff <filename> Loads cached ibnetdiscover data and do a diff comparison
to the
current network or another cache. A special diff output
for iblinkinfo output will be displayed showing differences
between the old and current fabric links. Be default, the fol-
lowing are compared for differences: port connections and
port state. See ibnetdiscover for information on caching
ibnetdiscover output.
--diffcheck <key(s)> Specifies what diff checks should be done in the--diffoption
above. Comma separate multiple diff check key(s). The
available diff checks are:port = port connections,state =
port state, lid = lids, nodedesc = node descriptions. If port
is specified alongside lid or nodedesc, remote port lids and
node descriptions will also be compared.
--filterdownports <filename> Filters downports indicated in a ibnetdiscover cache. If a
port was previously indicated as down in the specified
cache, and is still down, do not output it in the resulting out-
put. This option may be particularly useful for environ-
ments where switches are not fully populated, thus much of
the default iblinkinfo info is considered un-useful. See
ibnetdiscover for information on caching ibnetdiscover out-
put.
Table 35 - saquery Flags and Options
Flags Description
-p Gets PathRecord info.
Table 34 - iblinkinfo Flags and Options
Flags Description