User Manual

InfiniBand Fabric UtilitiesRev 2.2-1.0.1
Mellanox Technologies
230
--switch Prints data for switches only.
--ca Prints data for CA’s only.
--router Prints data for routers only
--clear-errors-k Clear error counters after read. -k and -K can be used together to clear both
errors and counters.
--clear-counts -K Clear data counters after read.
CAUTION: clearing data counters will occur regardless of if they are printed
or not. This is because data counters are only printed on ports which have
errors. This means if a port has 0 errors and the -K option is specified the data
counters will be cleared without any printed output.
-details Includes receive error and transmits discard details
--load-cache <filename> Loads and uses the cached ibnetdiscover data stored in the specified filename.
May be useful for outputting and learning about other fabrics or a previous
state of a fabric. Cannot be used if user specifies a direct route path. See
ibnetdiscover for information on caching ibnetdiscover output.
-R This option is obsolete (and has no effect).
-d Raises the IB debugging level. May be used several times (-ddd or -d -d -d).
-e Shows send and receive errors (time-outs and others)
-h Shows the usage message
-v Increases the application verbosity level. May be used several times (-vv or -
v -v -v)
-C <ca_name> Uses the specified ca_name.
-P <ca_port> Uses the specified ca_port.
-t <timeout_ms> Overrides the default timeout for the solicited mads.
Table 33 - ibqueryerrors Flags and Options
Flags Description