User Manual

InfiniBand Fabric UtilitiesRev 2.2-1.0.1
Mellanox Technologies
228
Synopsys
ibtracert [-d(ebug)] [-v(erbose)] [-D(irect)] [-L(id)] [-e(rrors)] [-u(sage)] [-G(uids)]
[-f(orce)] [-n(o_info)] [-m mlid] [-s smlid] [-C ca_name][-P ca_port] [-t(imeout) timeout_ms]
[-V(ersion)] [--node-name--map <node-name-map>] [-h(elp)] [<dest dr_path|lid|guid> [<startlid>
[<endlid>]]
Options
The table below lists the various flags of the command.
Most OpenIB diagnostics take the following common flags. The exact list of supported flags per
utility can be found in the usage message and can be shown using the util_name -h syntax.
Table 32 - ibtracert Flags and Options
Flag Description
--force, -f Force
-n, --no_info Simple format; do not show additional information
--mlid, -m <mlid> Shows the multicast trace of the specified mlid
--node-name-map <node-name-
map>
Specifies a node name map. The node name map file maps GUIDs to
more user friendly names.
--debug, -d/-ddd/-d -d -d Raises the IB debugging level
--Lid, -L Uses LID address argument
--errors, -e Shows send and receive errors
--usage, -u Usage message
--Guid, -G Uses GUID address argument. In most cases, it is the Port GUID.
Example:
"0x08f1040023"
--sm_port, -s <smlid> Uses 'smlid' as the target lid for SM/SA queries
--help, -h Shows the usage message
-verbose, -v/-vv/-v -v -v Increases the application verbosity level
--version, -V Shows the version info
--Ca, -C <ca_name> Uses the specified ca_name
--Port, -P <ca_port> Uses the specified ca_port
--timeout, -t <timeout_ms> Overrides the default timeout for the solicited mads
Examples
• Unicast examples
ibtracert 4 16 # show path between lids 4 and 16
ibtracert -n 4 16 # same, but using simple output format
ibtracert -G 0x8f1040396522d 0x002c9000100d051 # use guid addresses