User Manual

Rev 2.2-1.0.1
Mellanox Technologies
15
2.2-1.0.1 April 30, 2014
• Updated the following section:
• Section 2.3.1, “Pre-installation Notes”, on page 35
• Section 2.3.2, “Installation Script”, on page 36
• Section , “Options”, on page 36
• Section 2.3.3, “Installation Procedure”, on page 39
• Section 2.3.6, “Installation Logging”, on page 45
• Section 2.5.1, “Setting up MLNX_OFED YUM Repository”,
on page 47
• Section 4.6.4, “RoCE Quality of Service Mapping”, on page 87
• Section 4.7.2.2, “Creating Time Stamping Completion Queue”,
on page 98
• Section 4.7.2.3, “Polling a Completion Queue”, on page 98
• Section 4.7.2.4, “Querying the Hardware Time”, on page 99
• Section 4.11, “Contiguous Pages”, on page 105
• Section 4.15.2, “Setting Up SR-IOV”, on page 112
• Section 4.15.6.2, “Virtual Function InfiniBand Ports”, on
page 122
• Section 4.18, “Ethtool”, on page 132
• Appendix D, “Lustre Compilation over MLNX_OFED” page 300
2.2-1.0.1 April 30, 2014
• Removed the following section:
• ibcheckerrs
• FlexBoot Package
• Mellanox FlexBoot
• Burning Firmware with SR-IOV
2.1-1.0.6 March 04,
2014
• No changes
2.1-1.0.0 February 18,
2014
• Updated the following section:
• Section 2.3.3, “Installation Procedure”, on page 39
• Section 4.15.2, “Setting Up SR-IOV”, on page 112
• Section 8.6.1, “Overview”, on page 198
December
2013
• Added the following sections:
• Section 2.3.6, “Installation Logging”, on page 45
• Section 4.7.2, “RoCE Time Stamping”, on page 97 and its subsec-
tions
• Section 4.20, “PeerDirect”, on page 135
• Section 4.21, “Inline-Receive”, on page 135
• Section 4.22, “Ethernet Performance Counters”, on page 136
• Section 4.23, “Memory Window”, on page 140
• Section 4.1.2.1.1, “SRP Module Parameters”, on page 52
• Section 4.1.2.1.2, “SRP Remote Ports Parameters”, on page 53
• Section 4.1.2.2.1, “SRP sysfs Parameters”, on page 54
• “srpd” on page 57
• Section 4.7.1.3, “Querying Time Stamping Capabilities via eth-
tool”, on page 97
Table 1 - Document Revision History
Release Date Description