User Manual

Rev 2.2-1.0.1
Mellanox Technologies
131
 To get QCN current configuration sorted by priority:
mlnx_qcn -i eth2 -g parameters
 To show QCN's statistics sorted by priority:
mlnx_qcn -i eth2 -g statistics
Example output when running mlnx_qcn -i eth2 -g parameters:
--rpg_min_dec_fac=RPG_MIN_DEC_FAC_LIST Set value of rpg_min_dec_fac according to
priority, use spaces between values and -1
for unknown values.
--rpg_min_rate=RPG_MIN_RATE_LIST Set value of rpg_min_rate according to prior-
ity, use spaces between values and -1 for
unknown values.
--cndd_state_machine=CNDD_STATE_MACHINE_LIST Set value of cndd_state_machine according to
priority, use spaces between values and -1
for unknown values.
priority 0:
rpg_enable: 0
rppp_max_rps: 1000
rpg_time_reset: 1464
rpg_byte_reset: 150000
rpg_threshold: 5
rpg_max_rate: 40000
rpg_ai_rate: 10
rpg_hai_rate: 50
rpg_gd: 8
rpg_min_dec_fac: 2
rpg_min_rate: 10
cndd_state_machine: 0
priority 1:
rpg_enable: 0
rppp_max_rps: 1000
rpg_time_reset: 1464
rpg_byte_reset: 150000
rpg_threshold: 5
rpg_max_rate: 40000
rpg_ai_rate: 10
rpg_hai_rate: 50
rpg_gd: 8
rpg_min_dec_fac: 2
rpg_min_rate: 10
cndd_state_machine: 0
.............................
.............................
priority 7:
rpg_enable: 0
rppp_max_rps: 1000
rpg_time_reset: 1464
rpg_byte_reset: 150000
rpg_threshold: 5