User Manual

Rev 2.2-1.0.1
Mellanox Technologies
13
Document Revision History
Table 1 - Document Revision History
Release Date Description
2.2-1.0.1 June 10, 2014
• Added the following sections:
• Section 1.5.1, “Configuring DAPL over RoCE”, on page 28
• Section 1.5.2, “A Detailed Example”, on page 29 and its subsec-
tions
• Section 2.8, “UEFI Secure Boot”, on page 50
• Section 4.3, “Ethernet over IB (EoIB) vNic”, on page 61 and its
subsections
• Section 5.4.6, “Configuring MXM over Different Transports”,
on page 151
• Section 5.4.7, “Configuring Service Level Support”, on
page 152
• Section 8.5.8, “Routing Chains”, on page 190 and its subsections
• Section 9.4.21, “ibnodes”, on page 258
• Section 9.4.22, “ibswitches”, on page 259
• Section 9.4.23, “ibnetsplit”, on page 259
• Section 9.4.24, “ibccconfig”, on page 260
• Section 9.4.25, “ibccquery”, on page 261
• Section 9.4.26, “smparquery”, on page 262
• Section 9.4.27, “ibtopodiff”, on page 263
• Section 9.4.28, “ibcongest”, on page 264
• Section 9.4.29, “ibaddr”, on page 266
• Section 9.4.30, “sminfo”, on page 266
• Section 9.4.31, “ibnetdiscover”, on page 267
• Section 9.4.32, “ibping”, on page 267
• Section 9.4.33, “ibsysstat”, on page 268
• Section 9.4.34, “ibcacheedit”, on page 268
• Section 9.4.35, “dump_fts”, on page 269
• Updated thew following sections:
• Section 5.5, “Fabric Collective Accelerator”, on page 152
• Section 8.5.1, “Effect of Topology Changes”, on page 177
• Section 8.5.3.1, “UPDN Algorithm Usage”, on page 179
• Section 9.4.1, “ibdiagnet (of ibutils2) - IB Net Diagnostic”, on
page 221
• Section 9.4.2, “ibdiagnet (of ibutils) - IB Net Diagnostic”, on
page 225
• Section 9.4.6, “ibqueryerrors”, on page 229
• Table 33, “ibqueryerrors Flags and Options,” on page 229
• Table 41, “perfquery Options,” on page 249