User Manual

Driver FeaturesRev 2.2-1.0.1
Mellanox Technologies
112
4.15.2 Setting Up SR-IOV
Depending on your system, perform the steps below to set up your BIOS. The figures used in this
section are for illustration purposes only. For further information, please refer to the appropriate
BIOS User Manual:
Step 1. Enable "SR-IOV" in the system BIOS.
Step 2. Enable "Intel Virtualization Technology".
Step 3. Install a hypervisor that supports SR-IOV.
Step 4. Depending on your system, update the /boot/grub/grub.conf file to include a similar com-
mand line load parameter for the Linux kernel.