User Manual

Rev 2.1-1.0.6

Mellanox Technologies

Note: For more details on hca_self_test.ofed, see the file hca_self_test.readme

under

docs/.

# hca_self_test.ofed

---- Performing Adapter Device Self Test ----

Number of CAs Detected ................. 1

PCI Device Check ....................... PASS

Kernel Arch ............................ x86_64

Host Driver Version .................... MLNX_OFED_LINUX-2.1-1.0.0 (OFED-2.1-1.0.0):

3.0.76-0.11-default

Host Driver RPM Check .................. PASS

Firmware on CA #0 VPI .................. v2.30.8000

Firmware Check on CA #0 (VPI) .......... PASS

Host Driver Initialization ............. PASS

Number of CA Ports Active .............. 1

Port State of Port #1 on CA #0 (VPI)..... UP 4X FDR (InfiniBand)

Port State of Port #2 on CA #0 (VPI)..... UP 4X FDR (InfiniBand)

Error Counter Check on CA #0 (VPI)...... PASS

Kernel Syslog Check .................... PASS

Node GUID on CA #0 (VPI) ............... 00:02:c9:03:00:30:0e:60

------------------ DONE ---------------------

2.3.4 Installation Results

Software

• Most of MLNX_OFED packages are installed under the “/usr” directory except for the

following packages which are installed under the “/opt” directory:

• openshmem, bupc, fca and ibutils

• The kernel modules are installed under

• /lib/modules/`uname -r`/updates on SLES and Fedora Distributions

• /lib/modules/`uname -r`/extra/mlnx-ofa_kernel on RHEL and other RedHat like Distribu-

tions

• /lib/modules/`uname -r`/updates/dkms/ on Ubuntu

Firmware

•

The firmware of existing network adapter devices will be updated if the following two

conditions are fulfilled:

a. You run the installation script in default mode; that is, without the option ‘--without-fw-update’.

After the installer completes, information about the Mellanox OFED installation such as

prefix, kernel version, and installation parameters can be retrieved by running the com-

mand /etc/infiniband/info.