User Manual

RcvConstraintErrors:.............0
LinkIntegrityErrors:.............0
ExcBufOverrunErrors:.............0
VL15Dropped:.....................0
XmtData:.........................0
RcvData:.........................0
XmtPkts:.........................0
RcvPkts:.........................0
Rev 2.1-1.0.6
Mellanox Technologies
215
9.14 ibcheckerrs
Validates an IB port (or node) and reports errors in counters above threshold.
Check specified port (or node) and report errors that surpassed their predefined threshold. Port
address is lid unless -G option is used to specify a GUID address. The predefined thresholds can
be dumped using the -s option, and a user defined threshold_file (using the same format as the
dump) can be specified using the -t <file> option.
Synopsis
Output Files
Table 35 lists the various flags of the command.
ibcheckerrs [-h] [-b] [-v] [-G] [-T <threshold_file>] [-s] [-N |-nocolor] [-C ca_name]
[-P ca_port] [-t timeout_ms] <lid|guid> [<port>]
Table 35 - ibcheckerrs Flags and Options
Flag
Optional /
Mandatory
Default
(If Not
Specified)
Description
-h(help) Optional Print the help menu
-b Optional Print in brief mode. Reduce the output to show
only if errors are present, not what they are
-v(erbose) Optional Increase verbosity level. May be used several
times for additional verbosity (-vvv or -v -v -
v)
-G(uid) Optional Use GUID address argument. In most cases, it
is the Port GUID. Example: ‘0x08f1040023’
-T
<threshold_fi
le>
Optional Use specified threshold file
-s Optional Show the predefined thresholds
-N | -nocolor Optional color mode Use mono mode rather than color mode