User Manual

InfiniBand Fabric Diagnostic UtilitiesRev 2.1-1.0.6
Mellanox Technologies
200
Options
Example:
9.9 ibstatus
Displays basic information obtained from the local InfiniBand driver. Output includes LID,
SMLID, port state, port physical state, port width and port rate.
Synopsis
Output Files
Table 30 lists the various flags of the command.
-v Enable verbose mode. Adds additional information such as: Device ID, Part Number,
Card Name, Firmware version, IB port state.
-h Print help messages.
sw417:~/BXOFED-1.5.2-20101128-1524 # ibdev2netdev -v
mlx4_0 (MT26428 - MT1006X00034) FALCON QDR fw 2.7.9288 port 1 (ACTIVE) ==> eth5
(Down)
mlx4_0 (MT26428 - MT1006X00034) FALCON QDR fw 2.7.9288 port 1 (ACTIVE) ==> ib0
(Down)
mlx4_0 (MT26428 - MT1006X00034) FALCON QDR fw 2.7.9288 port 2 (DOWN ) ==> ib1
(Down)
mlx4_1 (MT26448 - MT1023X00777) Hawk Dual Port fw 2.7.9400 port 1 (DOWN ) ==> eth2
(Down)
mlx4_1 (MT26448 - MT1023X00777) Hawk Dual Port fw 2.7.9400 port 2 (DOWN ) ==> eth3
(Down)
sw417:~/BXOFED-1.5.2-20101128-1524 # ibdev2netdev
mlx4_0 port 1 ==> eth5 (Down)
mlx4_0 port 1 ==> ib0 (Down)
mlx4_0 port 2 ==> ib1 (Down)
mlx4_1 port 1 ==> eth2 (Down)
mlx4_1 port 2 ==> eth3 (Down)
ibstatus [-h] [<device name>[:<port>]]*
Table 30 - ibstatus Flags and Options
Flag
Optional /
Mandatory
Default
(If Not
Specified)
Description
-h Optional Print the help menu
<device> Optional All devices Print information for the specified device.
May specify more than one device