User Manual

port-group

# The syntax of the port name is as follows:

# "node_description/Pnum".

# node_description is compared to the NodeDescription of the node,

# and "Pnum" is a port number on that node.

port-name: vs1 HCA-1/P1, vs2 HCA-1/P1

end-port-group

# using partitions defined in the partition policy

port-group

partition: Part1

pkey: 0x1234

end-port-group

# using node types: CA, ROUTER, SWITCH, SELF (for node that runs SM)

# or ALL (for all the nodes in the subnet)

port-group

node-type: CA, SELF

end-port-group

end-port-groups

qos-setup

# This section of the policy file describes how to set up SL2VL and VL

# Arbitration tables on various nodes in the fabric.

# However, this is not supported in OFED - the section is parsed

# and ignored. SL2VL and VLArb tables should be configured in the

# OpenSM options file (by default - /var/cache/opensm/opensm.opts).

end-qos-setup

qos-levels

# Having a QoS Level named "DEFAULT" is a must - it is applied to

# PR/MPR requests that didn't match any of the matching rules.

qos-level

use: default QoS Level

sl: 0

end-qos-level

# the whole set: SL, MTU-Limit, Rate-Limit, PKey, Packet Lifetime

qos-level

Rev 2.1-1.0.6

Mellanox Technologies

171