User Manual

Rev 2.1-1.0.6
Mellanox Technologies
13
• Appendix C.2, “mlx4_core Parameters” page 239
• Section 4.1.2.2, “Manually Establishing an SRP Con-
nection”, on page 43
• Section 4.1.2.3, “SRP Tools - ibsrpdm, srp_daemon
and srpd Service Script”, on page 45
• Section 4.1.2.4, “Automatic Discovery and Connection
to Targets”, on page 47
• Section 4.1.2.5, “Multiple Connections from Initiator
InfiniBand Port to the Target”, on page 48
• Section 4.1.2.6, “High Availability (HA)”, on page 48
• Section 4.1.2.7, “Shutting Down SRP”, on page 49
• Section 4.15, “Ethtool”, on page 104
2.0-3.0.0 October 2013 Removed section “Command Line Interface (CLI)”
Updated the following sections:
• Appendix E, “Lustre Compilation over MLNX_OFED”
page 242
August 2013
• Updated the following sections:
• Section 1.3.4, “ULPs”, on page 22
• Section 4.12, “Flow Steering”, on page 88 and its subsec-
tions
• Section 1.3.3, “Mid-layer Core”, on page 22
• Section 4.8, “Ethernet Tunneling Over IPoIB Driver
(eIPoIB)”, on page 81
• Section 8.2.1, “opensm Syntax”, on page 138
• Appendix C, “mlx4 Module Parameters” page 239
• Added the following sections:
• Section 1.5, “RDMA over Converged Ethernet
(RoCE)”, on page 24
• Section 4.5, “Quality of Service Ethernet”, on page 66
and its subsections
• Section 4.11, “XRC - eXtended Reliable Connected
Transport Service for InfiniBand”, on page 87
• Section 4.13.7, “Configuring Pkeys and GUIDs under
SR-IOV”, on page 98
and its subsections
• Section 4.15, “Ethtool”, on page 104
• Appendix E, “Lustre Compilation over MLNX_OFED”
page 242
2.0-2.0.5 April 2013 Initial release
Table 1 - Document Revision History
Release Date Description