User Manual

Rev 2.1-1.0.6
Mellanox Technologies
12
Document Revision History
Table 1 - Document Revision History
Release Date Description
2.1-1.0.6 March 18, 2014
• Updated the following section:
• Section 4.2, “iSCSI Extensions for RDMA (iSER)”, on
page 55
- Removed the note regarding iSER being at beta level
•
Section 9.17, “ibdump”, on page 221 - Added clarification
on how to use ibdump with RoCE
2.1-1.0.0 February 18, 2014
• Updated the following section:
•
Section 2.3.3, “Installation Procedure”, on page 31
• Section 4.13.2, “Setting Up SR-IOV”, on page 91
• Section 8.6.1, “Overview”, on page 167
December 2013
• Added the following sections:
• Section 2.3.6, “Installation Logging”, on page 40
• Section 4.6.2, “RoCE Time Stamping”, on page 78 and
its subsections
•
Section 4.17, “PeerDirect”, on page 106
• Section 4.18, “Inline-Receive”, on page 107
• Section 4.19, “Ethernet Performance Counters”, on
page 107
• Section 4.20, “Memory Window”, on page 112
• Section 4.1.2.1.1, “SRP Module Parameters”, on
page 42
• Section 4.1.2.1.2, “SRP Remote Ports Parameters”, on
page 42
• Section 4.1.2.2.1, “SRP sysfs Parameters”, on page 43
• Section , “srpd”, on page 46
• Section 4.6.1.3, “Querying Time Stamping Capabilities
via ethtool”, on page 78
• Updated the following sections:
• Section 1.5, “RDMA over Converged Ethernet
(RoCE)”, on page 24
• Section 2.3.3, “Installation Procedure”, on page 31
• Section 4.13.2, “Setting Up SR-IOV”, on page 91
• Section 5.3.1, “Compiling OpenMPI with MXM”, on
page 119
• Section 5.3.2, “Enabling MXM in OpenMPI”, on
page 120
• Section 5.3.4, “Configuring Multi-Rail Support”, on
page 121
• Section 4.8.4, “Setting Performance Tuning”, on
page 85
• Section 8.4.1, “File Format”, on page 150