User Manual

Rev 4.70
Mellanox Technologies
57
8.9.5 Registry Settings
The following attributes must be set manually and will be added to the miniport registry.
8.9.5.1 Default Settings
When DSCP configuration registry keys are missing in the miniport registry, the following
defaults are assigned.
Table 7 - DSCP Registry Keys Settings
Registry Key Description
TxUntagPriorityTag If 0x1, do not add 802.1Q tag to transmitted packets which
are assigned 802.1p priority, but are not assigned a non-zero
VLAN ID (i.e. priority-tagged).
Default 0x0, for DSCP based PFC set to 0x1.
RxUntaggedMapToLossless If 0x1, all untagged traffic is mapped to the lossless receive
queue.
Default 0x0, for DSCP based PFC set to 0x1.
RroceDscpMarkPriorityFlowControl_<ID> A value to mark DSCP for RoCE v2 packets assigned to
CoS=ID, when priority flow control is enabled. The valid
values range is from 0 to 63,
Default is ID value, e.g.
RroceDscpMarkPriorityFlowControl_3 is 3.
ID values range from 0 to 7.
For changes to take affect, please restart the network adapter after changing this registry
key.
Table 8 - DSCP Default Registry Keys Settings
Registry Key Default Value
TxUntagPriorityTag 0
RxUntaggedMapToLossles 0
RroceDscpMarkPriorityFlowControl_0 0
RroceDscpMarkPriorityFlowControl_1 1
RroceDscpMarkPriorityFlowControl_2 2
RroceDscpMarkPriorityFlowControl_3 3
RroceDscpMarkPriorityFlowControl_4 4
RroceDscpMarkPriorityFlowControl_5 5
RroceDscpMarkPriorityFlowControl_6 6