User Manual

Rev 4.70

Mellanox Technologies

Step 4. Select the adapters to be included in the bundle (that have not been associated with a VLAN).

Step 5. [Optional] Select Primary Adapter.

An active-passive scenario used for data transfer of link disconnecting. In such scenario, the

system uses one of the other interfaces. When the primary link comes up, the LBFO interface

returns to transfer data using the primary interface. If the primary adapter is not selected, the

primary interface is selected randomly.

Step 6. [Optional] Failback to Primary

Step 7. Check the checkbox.

The newly created virtual Mellanox adapter representing the bundle will be displayed by the

Device Manager under “Network adapters” in the following format (see the figure below):

Mellanox Virtual Miniport Driver - Team <bundle_name>