User Manual
Rev 4.70
Mellanox Technologies
173
# ------- The commands from Step 2 - 4 are not persistent, Its suggested to create
script is running after each OS reboot
# Step 2. Configure a Subnet Locator and Route records on each Hyper-V Host (Host 1 and
Host 2) mtlae14 & mtlae15
New-NetVirtualizationLookupRecord -CustomerAddress 172.16.14.5 -ProviderAddress
192.168.20.114 -VirtualSubnetID 5001 -MACAddress "00155D720100" -Rule "TranslationMetho-
dEncap"
New-NetVirtualizationLookupRecord -CustomerAddress 172.16.14.6 -ProviderAddress
192.168.20.114 -VirtualSubnetID 5001 -MACAddress "00155D720101" -Rule "TranslationMetho-
dEncap"
New-NetVirtualizationLookupRecord -CustomerAddress 172.16.15.5 -ProviderAddress
192.168.20.115 -VirtualSubnetID 5001 -MACAddress "00155D730100" -Rule "TranslationMetho-
dEncap"
New-NetVirtualizationLookupRecord -CustomerAddress 172.16.15.6 -ProviderAddress
192.168.20.115 -VirtualSubnetID 5001 -MACAddress "00155D730101" -Rule "TranslationMetho-
dEncap"
# Add customer route
New-NetVirtualizationCustomerRoute -RoutingDomainID "{11111111-2222-3333-4444-
000000005001}" -VirtualSubnetID "5001" -DestinationPrefix "172.16.0.0/16" -NextHop
"0.0.0.0" -Metric 255
# Step 4. Configure the Provider Address and Route records on Hyper-V Host 2 (Host 2
Only) mtlae15
$NIC = Get-NetAdapter "Port1"
New-NetVirtualizationProviderAddress -InterfaceIndex $NIC.InterfaceIndex -Pro-
viderAddress 192.168.20.115 -PrefixLength 24
New-NetVirtualizationProviderRoute -InterfaceIndex $NIC.InterfaceIndex -Destination-
Prefix "0.0.0.0/0" -NextHop 192.168.20.1
# Step 5. Configure the Virtual Subnet ID on the Hyper-V Network Switch Ports for each
Virtual Machine on each Hyper-V Host (Host 1 and Host 2)
# Run the command below for each VM on the host the VM is running on it, i.e. the for
mtlae14-005, mtlae14-006 on
# host 192.168.20.114 and for VMs mtlae15-005, mtlae15-006 on host 192.168.20.115
# mtlae15 only
Get-VMNetworkAdapter -VMName mtlae15-005 | where {$_.MacAddress –eq "00155D730100"} |
Set-VMNetworkAdapter -VirtualSubnetID 5001
Get-VMNetworkAdapter -VMName mtlae15-006 | where {$_.MacAddress –eq "00155D730101"} |
Set-VMNetworkAdapter -VirtualSubnetID 5001