User Manual

Rev 4.70

Mellanox Technologies

1 Introduction

This User Manual describes installation, configuration and operation of Mellanox WinOF driver

Rev 4.70 package.

Mellanox WinOF is composed of several software modules that contain InfiniBand and Ethernet

drivers. The Mellanox WinOF driver supports 10 or 40 Gb/s Ethernet, and 40 or 56 Gb/s Infini-

Band network ports. The port type is determined upon boot based on card capabilities and user

settings.

For more details please refer to MFT User Manual.

1.1 Hardware and Software Requirements

Table 5 - Hardware and Software Requirements

Requirements Description

Required Disk Space for Installation 100MB

Operating Systems

• Windows Server 2008 R2 (64 bit only)

• Windows Server 2012 (64 bit only)

• Windows Server 2012 R2 (64 bit only)

Note: The Operating System listed above must run

with administrator privileges.

1.2 Supplied Packages

Mellanox WinOF driver Rev 4.70 includes the following package:

• MLNX_VPI_WinOF-<version>_All_<OS>_<arch>.exe:

In this package, the port default is auto, RoCE is enabled

1.3 WinOF Set of Documentation

Under <installation_directory>\Documentation:

• License file

• User Manual (this document)

• MLNX_VPI_WinOF Release Notes