User Manual

Rev 4.70
Mellanox Technologies
138
14.3.21.2saquery Options
Table 34 - saquery Flags and Options
Flags Description
-p Gets PathRecord info.
-N Gets NodeRecord info.
--list | -D Gets NodeDescriptions of CAs only.
-S Gets ServiceRecord info.
-I Gets InformInfoRecord (subscription) info.
-L Returns the Lids of the name specified
-l Returns the unique Lid of the name speci-
fied
-G Returns the Guids of the name specified
-O Returns the name for the Lid specified
-U Returns the name for the Guid specified
-C Gets the SA’s class port info
-s Returns the PortInfoRecords with isSM or
isSMdisabled capability mask bit on.
-g Gets multicast group info
-m Gets multicast member info. If a group is
specified, limit the output to the group
specified and print one line containing only
the GUID and node description for each
entry.
Example:
saquery -m 0xc000
-x Gets LinkRecord info.
--src-to-dst Gets a PathRecord for <src:dst> where src
and dst are either node names or LIDs.
--sgid-to-dgid Gets a PathRecord for sgid to dgid where
both GIDs are in an IPv6 format acceptable
to inet_pton(3).
-C <ca_name> Uses the specified ca_name.
-P <ca_port> Uses the specified ca_port.
--smkey <val> Uses SM_Key value for the query. Will be
used only with "trusted" queries. If non-
numeric value (like’x’) is specified then
saquery will prompt for a value.