User Manual

Rev 4.70
Mellanox Technologies
135
14.3.19.3ibqueryerrors Exit Status
If a failure to scan the fabric occurs return -1. If the scan succeeds without errors beyond thresh-
olds return 0. If errors are found on ports beyond thresholds return 1.
14.3.19.4ibqueryerrors Files
/opt/ufm/files/conf/infiniband-diags/error_thresholds
Define threshold values for errors. File format is simple "name=val".
Comments begin with ’#’
Example:
14.3.20 ibsysstat
ibsysstat uses vendor MADs to validate connectivity between InfiniBand nodes and obtain other
information about the InfiniBand node.ibsysstat is run as client/server. Default is to run as client.
14.3.20.1ibsysstat Synopsis
ibsysstat [-d(ebug)] [-e(rr_show)] [-v(erbose)] [-G(uid)] [-C ca_name]
[-P ca_port] [-s smlid] [-t(imeout) timeout_ms] [-V(ersion)] [-o oui]
[-S(erver)] [-h(elp)] <dest lid | guid> [<op>]
14.3.20.2ibsysstat Options
-t <timeout_ms> Overrides the default timeout for the solicited mads.
# Define thresholds for error counters
SymbolErrorCounter=10
LinkErrorRecoveryCounter=10
VL15Dropped=100
Table 33 - ibsysstat Flags and Options
Flags Description
ping Verifies connectivity to server (default)
host Obtains host information from server
cpu Obtains cpu information from server
-o, --oui Uses specified OUI number to multiplex vendor
mads
-S, --Server Starts in server mode (do not return)
Debugging Flags Description
Table 32 - ibqueryerrors Flags and Options
Flags Description