User Manual

Rev 4.70
Mellanox Technologies
134
-r Reports the port information. This includes LID, port, exter-
nal port (if applicable), link speed setting, remote GUID,
remote port, remote external port (if applicable), and remote
node description information.
--data Includes the optional transmit and receive data counters.
--threshold-file Specifies an alternate threshold file.
The default is:
/opt/ufm/files/conf/infiniband-diags/error_thresholds
--switch Prints data for switches only.
--ca Prints data for CA’s only.
--router Prints data for routers only
--clear-errors-k Clear error counters after read. -k and -K can be used
together to clear both errors and counters.
--clear-counts -K Clear data counters after read.
CAUTION: clearing data counters will occur regardless of if
they
are printed or not. This is because data counters are
only
printed on ports which have errors. This means if a port
has 0
errors and the -K option is specified the data counters will
be
cleared without any printed output.
-details Includes receive error and transmits discard details
--load-cache <filename> Loads and uses the cached ibnetdiscover data stored in the
specified filename. May be useful for outputting and learn-
ing about other fabrics or a previous state of a fabric. Cannot
be used if user specifies a direct route path. See ibnetdis-
cover for information on caching ibnetdiscover output.
-R This option is obsolete (and has no effect).
-d Raises the IB debugging level. May be used several times (-
ddd or -d -d -d).
-e Shows send and receive errors (time-outs and others)
-h Shows the usage message
-v Increases the application verbosity level. May be used sev-
eral times (-vv or -v -v -v)
-C <ca_name> Uses the specified ca_name.
-P <ca_port> Uses the specified ca_port.
Table 32 - ibqueryerrors Flags and Options
Flags Description