User Manual

Rev 4.70

Mellanox Technologies

123

Examples

• Unicast examples

ibtracert 4 16 # show path between lids 4 and 16

ibtracert -n 4 16 # same, but using simple output format

ibtracert -G 0x8f1040396522d 0x002c9000100d051 # use guid addresses

• Multicast example

ibtracert -m 0xc000 4 16 # show multicast path of mlid 0xc000 between lids 4 and

14.3.11 sminfo

Optionally sets and displays the output of a sminfo query in a readable format. The target SM is

the one listed in the local port info, or the SM specified by the optional SM lid or by the SM

direct routed path.

--Lid, -L Uses LID address argument

--errors, -e Shows send and receive errors

--usage, -u Usage message

--Guid, -G Uses GUID address argument. In most cases, it is the Port GUID.

Example:

"0x08f1040023"

--sm_port, -s <smlid> Uses 'smlid' as the target lid for SM/SA queries

--help, -h Shows the usage message

-verbose, -v/-vv/-v -v -v Increases the application verbosity level

--version, -V Shows the version info

--Ca, -C <ca_name> Uses the specified ca_name

--Port, -P <ca_port> Uses the specified ca_port

--timeout, -t <timeout_ms> Overrides the default timeout for the solicited mads

Using sminfo for any purposes other than simple query may result in a mal-

function of the target SM.

Table 23 - ibtracert Flags and Options

Flag Description