User Manual

Rev 4.70

Mellanox Technologies

Rev 3.0.0 February 08, 2012

• Added section RDMA over Converged Ethernet (RoCE) and

its subsections

• Added section Hyper-V with VMQ

• Added section Network Driver Interface Specification (NDIS)

• Added section Header Data Split

• Added section Auto Sensing

• Added section Adapter Teaming

• Added section Port Protocol Configuration

• Added section Advanced Configuration for InfiniBand Driver

• Added section Advanced Configuration for Ethernet Driver

• Added section Updated section Tunable Performance Parame-

ters

• Added section Merged Ethernet and InfiniBand features sec-

tions

• Removed section Sockets Direct Protocol and its subsections

• Removed section Winsock Direct and Protocol and its subsec-

tions

• Removed section Added ConnectX®-3 support

• Removed section IPoIB Drivers Overview

• Removed section Booting Windows from an iSCSI Target

Rev 2.1.3 January 28. 2011 Complete restructure

Rev 2.1.2 October 10, 2010

• Removed section Debug Options.

• Updated Section 3, “Uninstalling Mellanox VPI Driver,” on

page 11

• Added Section 6, “InfiniBand Fabric,” on page 38 and its sub-

sections

• Added Section 6.3, “InfiniBand Fabric Performance Utilities,”

on page 71 and its subsections

Rev 2.1.1.1 July 14, 2010

• Removed all references of InfiniHost® adapter since it is not

supported starting with WinOF VPI v2.1.1

Rev 2.1.1 May 2010 First release

Table 1 - Revision History

Document Revision Date Changes