User Manual

Rev 4.70
Mellanox Technologies
10
December 30, 2013 Updated the following sections:
• Section 8.7.2.2, “Configuring Windows Host”, on
page 50
- Updated the example in Step 5
•
Section 11.1.4.1, “Performance Tuning Tool
Application”, on page 85
- Updated the Options table
•
Section 11.2, “Application Specific Optimization
and Tuning”, on page 89
- Removed the “Bus-master
DMA Operations”
•
Section 12, “OpenSM - Subnet Manager”, on
page 98
- Added an option of how to register OpemSM via
the PowerShell
•
Section 8.8.2, “Configuring the NVGRE using
PowerShell”, on page 54
Added the following sections:
• Section 7.4, “Configuring Quality of Service
(QoS)”, on page 34
• Appendix B: “NVGRE Configuration Scrips
Examples,” on page 171
Rev 4.55 December 15, 2013 Updated the following sections:
• Section 8.8, “Network Virtualization using
Generic Routing Encapsulation”, on page 52
• Section 8.8.2, “Configuring the NVGRE using
PowerShell”, on page 54
November 07, 2013
Updated the following sections:
• Section 8.7.2.2, “Configuring Windows Host”, on
page 50
• Section 14.4.19.1, “NTttcp Synopsis”, on
page 161
October 03, 2013 Added support for Windows Server 2012 R2
Rev 4.40 July 17, 2013 Updated the following sections:
• Section 8.7.1, “RoCE Overview”, on page 48
• Section 12, “OpenSM - Subnet Manager”, on
page 98
• Section 14.4.19, “NTttcp”, on page 160
• Section 15, “Troubleshooting”, on page 162
Added the following sections:
Appendix A: “Windows MPI (MS-MPI),” on page
168
Table 1 - Revision History
Document Revision Date Changes