User Guide
2-2
Chapter 2: Boot Agent Conguration
2.1 Intel(R) Boot Agent XE
The Intel(R) Boot Agent XE provides hardware-based Ethernet card congurations.
To start the Intel(R) Boot Agent XE and access the main screen:
1. Turn on the system.
2. During POST, press <Ctrl+S> when the following screen appears.
3. From the
Setup Menu
screen, use the Up/Down arrow key to select an item and press
<Space> to change the value.
Initializing Intel(R) Boot Agent XE v2.3.27
PXE 2.1 Build 092 (WfM 2.02)
Press Ctrl-S to enter Conguration Menu
Intel(R) Boot Agent XE v2.3.27
Setup Menu
Network Boot Protocol PXE (Preboot eXecution Enviroment)
Boot Order Use BIOS Setup Boot Order
Show Setup Prompt Enabled
Setup Menu Wait Time 2 seconds
Diagnostic Support Information
MAC Address 00E018122209 PBA Number FFFFFF-0FF
Memory DE180000 I/O E0000 IRQ 0A UMB C9000
PCI ID 8086/10FB/1043/8685/01 Slot 0101
Flags 01810:4000:0000:0000:1103:L
Select remote boot protocol.
<Esc> <Space> <Enter> <F4>
Cancel Changes Change Value Next Option Save Conguration
Network Boot Protocol [PXE (Preboot eXecution Enviroment)]
Conguration options: [PXE (Preboot eXecution Enviroment)]
Boot Order [Use BIOS Setup Boot Order]
Conguration options: [Use BIOS Setup Boot Order]
Show Setup Prompt [Enabled]
Conguration options: [Disabled] [Enabled]
Setup Menu Wait Time [2 seconds]
Conguration options: [0 seconds] [2 seconds] [3 seconds] [5 seconds]